The lowdown, applying grease to the fan pin works, no idea for how long (Already ordered a replacement fan from the HP website just in case), but when this fan fails, I will certainly update this post (Today is April 18, 2020).
The only reason i use my HP Envy 17-s143cl which has a slow I7-7500U (X0S43UA) is because it is silent most of the time, and quiet when the fan eventually spins up, not any more, today, the fan was very loud, and vibrates heavily, sometimes banging above the fan resolved it (Don’t try if you have a spinning disk, you will damage it, I have an SSD inside so it is okay).
So i took the laptop apart, extracted the fan, opened the fan casing, and then the plastic fan separates from the coil by simply pulling it out (With very little force, if you need any force you are doing it wrong).
So, like you see in the photos above, I applied some automotive lithium grease to the pin, and put everything back how it was, the fan is working very smoothly, just like before, if it fails and that is a good possibility, I will update this post, but for now, it looks like a hit
Also worth mentioning is that i usually add such lubricant to PC fans, the cheap $1 fans, they usually need the lubricant after a few months, but after adding the lubricant under the back sticker on a desktop PC fan, they usually work for years more without problems, so I expect this to not give me any trouble, but in any case, I have already ordered a replacement just in case, turns out the HP store is cheaper than ebay and amazon, Just go to HP and find the part you need, mine was the one below. it cost me with shipping an all around 32 US dollars.
806747-001 In stock
FAN – for Broadwell SKU (Fanless design for Braswell SKU)
RoHS: COMPLY_2.05
| Order subtotal | 18.26 |
| Shipping and Handling | 11.25 |
| Tax | 2.62 |
| Order total (USD) | 32.13 |